Is Type Centrifugal Pump Single Stage Single Suction Centrifugal Pump

Posted on

  • Model NO.: BPDA-083
  • Max.Capacity: 50-100 L/min
  • Impeller Number: Single-Stage Pump
  • Influent Type of Impeller: Single Suction Pump
  • Pump Casing Combined: Horizontal Split Pumps
  • Impeller: Open or Closed
  • Size: 8 Inches
  • Factory: Yes
  • Application: Metallurgical, Mining, Coal, Power, Building Mater
  • Structure: Single-Stage Pump
  • Material: A05. A07, A49 High Chrome Alloy or Natural Rubber
  • Trademark: Boda
  • Specification: Electromagnetic Pump
  • HS Code: 8413709990
  • Max.Head: 30-50m
  • Driving Type: Motor
  • Working Pressure: High Pressure Pump
  • Position of Pump Shaft: Horizontal Pump
  • Mounting Height: Suction Centrifugal
  • Usage: Pumps
  • OEM: Yes
  • After Sale Service: Yes
  • Usage 1: Mining Industry
  • Theory: Centrifugal Pump
  • Seal Form: Mechanical Seal, Expeller Seal or Packing Seal
  • Transport Package: Wooden Case
  • Origin: Shijiazhuang

Is Type Centrifugal Pump Single Stage Single Suction Centrifugal Pump
product description

      IS type single-stage single-suction (axial suction) centrifugal pump is a nationally designed energy-saving pump. It is an updated version of BA type, B type and other single-stage clean water centrifugal pumps. The advantages of the single-stage single-suction centrifugal pump are as follows: the whole series of hydraulic performance layout is reasonable, the user has a wide selection range, and the maintenance is convenient; the efficiency and the suction stroke reach the international average advanced level. This type of pump is suitable for industrial and urban water supply and drainage. It can also be used for agricultural drainage and for the transportation of clean water or other liquids with physical and chemical properties similar to clean water. The temperature is not higher than 80 °C.

      IS and IR pumps are horizontal single-stage single-suction clear water centrifugal pumps for industrial and agricultural and urban, drainage, fire water supply and so on. It is used to suck water and physicochemical properties similar to water without solid particles. It is widely used in industrial and agricultural and urban, drainage, fire water supply and so on. The IS and IR pumps are designed according to the performance and size specified in the international standard IS02858. The technical standards are close to the international standards and reach the international advanced level. It is one of the energy-saving pump products promoted in China. The pump has the advantages of simple structure, reliable performance, small volume, light weight, good anti-cavitation performance, low power consumption and convenient use and maintenance. IS and IR pumps have wide versatility. There are 140 specifications in the whole series, but only four types of shafts are used; shafts, bearings and shaft seals of the same specification can be interchanged; there are only four types of suspensions for the whole series of pumps. The pump speed is divided into 2900 and 1450 rev / min. The performance is as follows: 2900 rpm / 1450 rev / min Large flow: 240 m 3 / min 400 m 3 / min high total head: 125 m 55 m high speed: 3500 rev / min (for 60 wave power supply, impeller diameter Reduced) High operating temperature: 80 ° C allows the suction line pressure of 0.3 MPa, the pump's high operating pressure of 1.6 MPa.

Features

1. IS type single-stage single-suction centrifugal pump is designed according to the performance and size specified by international standard ISO2858. It is mainly composed of pump body, pump cover, impeller, shaft, seal ring, bushing and suspension bearing.

2. The pump body and pump cover part of the IS type single-stage single-suction centrifugal pump are divided from the back of the impeller, which is commonly referred to as the rear door structure. The utility model has the advantages that the maintenance is convenient, the pump body is not moved during the maintenance, the suction pipeline, the discharge pipeline and the electric motor are removed, and only the intermediate coupling member of the extension coupling is removed, and the rotor portion can be taken out for maintenance.

3. The pump housing (ie pump body and pump cover) forms the working chamber of the pump. The impeller, shaft and rolling bearing are the rotor of the pump. The suspension bearing component supports the rotor portion of the pump, which is subjected to the radial and axial forces of the pump.

4. In order to balance the axial force of the pump, most of the impellers of the pump are provided with a sealing ring at the front and the rear, and a balance hole is arranged on the rear cover of the impeller. Since some pumps have little axial force, the back of the impeller is not sealed. Ring and balance hole.

5. The axial seal ring of the pump is composed of packing gland, packing ring and packing to prevent air intake or a large amount of water leakage. If the impeller of the pump is balanced, the cavity with the soft packing is connected to the suction port of the impeller. If the liquid at the inlet of the impeller is in a vacuum state, it is easy to enter the air along the surface of the sleeve. Therefore, a packing ring is inserted in the filling chamber. A small hole in the pump cover guides the pressurized water in the pump chamber to the packing ring for sealing. If there is no balance hole in the impeller of the pump, since the liquid pressure on the back of the impeller is greater than atmospheric pressure, there is no gas leakage problem, so the packing ring may not be installed.

6. In order to avoid shaft wear, bushing protection is provided at the part of the shaft passing through the packing cavity. An O-ring seal is provided between the sleeve and the shaft to prevent air intake or water leakage along the mating surface.

7. The transmission mode of the pump is connected with the motor by lengthening the elastic coupling. The rotation direction of the pump is rotated clockwise from the driving end.

Model meaning

For example: IS80-65-160A

IS-Single-stage single-suction clear water centrifugal pump

80-suction port diameter (mm)

65-outlet diameter (mm)

160-impeller nominal diameter (mm)

A-impeller cutting mark
 

  (t/h) (m) (r/min) (kw) (mm)
IS50-32-125 12.5 20 2900 2.2 50
6.3 5 1450 0.55 50
IS50-32-125A 11.2 16 2900 1.5 50
5.6 4 1450 0.55 50
IS50-32-160 12.5 32 2900 3 50
6.3 8 1450 0.55 50
IS50-32-160A 11.7 28 2900 2.2 50
5.9 7 1450 0.55 50
IS50-32-160B 10 23 2900 1.5 50
5.4 6 1450 0.55 50
IS50-32-200 12.5 50 2900 5.5 50
6.3 12.5 1450 0.75 50
IS50-32-200A 11.7 44 2900 4 50
5.9 11 1450 0.55 50
IS50-32-200B 10.8 37.5 2900 3 50
5.4 9.5 1450 0.55 50
IS50-32-250 12.5 80 2900 11 50
6.3 20 1450 1.5 50
IS50-32-250A 11.7 70 2900 7.5 50
5.9 17.5 1450 1.1 50
IS50-32-250B 10 60 2900 5.5 50
5.4 15 1450 0.75 50
IS65-50-125 25 20 2900 3 65
12.5 5 1450 0.55 65
IS65-50-125A 22.4 16 2900 2.2 65
11.2 4 1450 0.55 65
IS65-50-125B 21 13.5 2900 1.5 65
IS65-50-160 25 32 2900 5.5 65
12.5 8 1450 0.75 65
IS65-50-160A 23.4 28 2900 4 65
11.7 7 1450 0.55 65
IS65-50-160B 21.7 24 2900 3 65
10.8 6 1450 0.55 65
IS65-40-200 25 50 2900 7.5 65
12.5 12.5 1450 1.1 65
IS65-40-200A 23.4 44 2900 5.5 65
11.7 11 1450 0.75 65
IS65-40-200B 21 35.3 2900 4 65
10.5 8.6 1450 0.55 65
IS65-40-250 25 82 2900 15 65
12.5 20 1450 2.2 65
IS65-40-250A 23.5 70 2900 11 65
11.7 17.5 1450 1.5 65
IS65-40-250B 21 56 2900 7.5 65
10 14 1450 1.1 65
IS65-40-315 25 125 2900 30 65
12.5 32 1450 4 65
IS65-40-315A 23.9 114 2900 22 65
11.7 28.5 1450 3 65
IS65-40-315B 22.7 103 2900 18.5 65
10.8 24 1450 2.2 65
IS65-40-315C 20 92 2900 15 65
10 22.5 1450 2.2 65
IS80-65-125 50 20 2900 5.5 80
25 5 1450 0.75 80
IS80-65-125A 44.7 16 2900 4 80
22.4 4 1450 0.55 80
IS80-65-125B 43.4 14.6 2900 3 80
IS80-65-160 50 32 2900 7.5 80
25 8 1450 1.5 80
IS80-65-160A 45 27 2900 5.5 80
23.4 7 1450 1.1 80
IS80-65-160B 40 22 2900 4 80
21.7 6 1450 0.75 80
IS80-50-200 50 50 2900 15 80
25 12.5 1450 2.2 80
IS80-50-200A 46.8 44 2900 11 80
23.4 11 1450 1.5 80
IS80-50-200B 41.5 38 2900 7.5 80
20.5 9.5 1450 1.1 80
IS80-50-250 50 80 2900 22 80
25 20 1450 3 80
IS80-50-250A 46.8 70 2900 18.5 80
23.4 17.5 1450 2.2 80
IS80-50-250B 43.3 60 2900 15 80
20 15 1450 1.5 80
IS80-50-315 50 125 2900 37 80
25 32 1450 5.5 80
IS80-50-315A 47.7 114 2900 37 80
23.8 28.5 1450 5.5 80
IS80-50-315B 45.4 103 2900 30 80
22.7 25.8 1450 4 80
IS80-50-315C 40 89 2900 22 80
20 23 1450 3 80
IS100-80-125 100 20 2900 11 100
50 5 1450 1.5 100
IS100-80-125A 89.4 16 2900 7.5 100
44.7 4 1450 1.1 100
IS100-80-160 100 32 2900 15 100
50 8 1450 2.2 100
IS100-80-160A 93.5 28 2900 11 100
46.8 7 1450 1.5 100
IS100-80-160B 83 22 2900 7.5 100
41 5.3 1450 1.1 100
IS100-65-200 100 50 2900 22 100
50 12.5 1450 4 100
IS100-65-200A 93.5 44 2900 18.5 100
46.8 11 1450 3 100
IS100-65-200B 86.6 38 2900 15 100
43.3 9.5 1450 2.2 100
IS100-65-250 100 80 2900 37 100
50 20 1450 5.5 100
IS100-65-250A 93.5 70 2900 30 100
46 17.5 1450 4 100
IS100-65-250B 79 60 2900 22 100
41 15 1450 3 100
IS100-65-315 100 125 2900 75 100
50 32 1450 11 100
IS100-65-315A 94 109 2900 55 100
47 27.9 1450 7.5 100
IS100-65-315B 87.4 95.7 2900 45 100
43.7 24.5 1450 7.5 100
IS100-65-315C 81 82 2900 37 100
40.5 21 1450 5.5 100
IS125-100-200 200 50 2900 45 125
100 12.5 1450 7.5 125
IS125-100-200A 187 44 2900 37 125
93.5 11 1450 5.5 125
IS125-100-200B 158 35 2900 22 125
86.5 9.5 1450 4 125
IS125-100-250 200 80 2900 75 125
100 20 1450 11 125
IS125-100-250A 187 70 2900 55 125
93.5 17.5 1450 7.5 125
IS125-100-250B 173 60 2900 45 125
86.5 15 1450 5.5 125
IS125-100-250C 160 49 2900 37 125
IS125-100-315 200 125 2900 110 125
100 32 1450 15 125
IS125-100-315A 191 114 2900 110 125
95.5 28.5 1450 15 125
IS125-100-315B  181.6 103 2900 90 125
90 25.8 1450 11 125
IS125-100-315C 171.6 92 2900 75 125
85.8 23 1450 11 125
IS125-100-400 100 50 1450 30 125
IS125-100-400A 93.5 44 1450 22 125
IS125-100-400B 86.5 38 1450 18.5 125
IS150-125-250 200 20 1450 18.5 150
IS150-125-250A 187 17.5 1450 15 150
IS150-125-250B 173 15 1450 11 150
IS150-125-315 200 32 1450 30 150
IS150-125-315A 187 28 1450 22 150
IS150-125-315B 173 24 1450 18.5 150
IS150-125-400 200 50 1450 45 150
IS150-125-400A 187 44 1450 37 150
IS150-125-400B 173 38 1450 30 150
IS200-150-250 400 20 1450 37 200
IS200-150-250A 374 17.5 1450 30 200
IS200-150-250B 346 15 1450 22 200
IS200-150-315 400 32 1450 55 200
IS200-150-315A 374 28 1450 45 200
IS200-150-315B 346 24 1450 37 200
IS200-150-400 400 50 1450 90 200
IS200-150-400A 374 44 1450 75 200
IS200-150-400B 346 38 1450 55 200
IS200-150-400C 324 30.8 1450 45 200

Vertical Electric Steam Boiler

Electric Steam Boiler,Oil,Gas Fired Steam Boiler Co., Ltd. , http://www.electric-steamboiler.com