- Model NO.: SSCD-150L
- Usage: Multifunctional
- Theory: Digital
- Carry Base: Module-n Synchronous Counter
- PLC Type: SE PLC
- Measuring Scope: 1-150mm
- Measuring Speed: Max.400m/Min
- Service Voltage: AC220V
- Trademark: SINO STAR
- Origin: Dongguan, Guangdong, China
- Type: Counter
- Function: Subtract Counter
- Carry Mode: Synchronous Counter
- Mechanism: Electronic
- Measuring Precision: 0.1%
- Countable Length: 0-99999.9m
- Accumulated Length: 0-999999m
- Power Consumption: Less Than 10W
- Specification: SGS
Caterpillar meter counter adopts synchronous belt wheel and anti-shake technology and enlarge contact area to realize anti-skid and anti-shake phenomena and improve the measurement precision.
Main characteristics:
Applicable wire diameter range: 1-150mm
Precision: 0.1%
Caterpillar meter counter adopts synchronous belt wheel and anti-shake technology and enlarge contact area to realize anti-skid and anti-shake phenomena and improve the measurement precision.
With the following characteristics after equipping with MLC-1A smart length counting display:
Data protection after electricity is cut off.
No matter the electricity is cut off normally or in a sudden meter-counting device can save the data.
automatically and display the original data after the electricity is supplied. Power failure protection chip. It does not need battery and maintenance.
2). Multiple pre-set function:
Pre-set length: input the length with the keyboard on the panel (unit: meter), when the pre-set length reaches
it will output control signal.
Pre-set lead lag: input the lead lag with the keyboard on the panel (unit: meter), when the pre-set length reaches, it will output prompt signal and notify the operator it will reach the preset length and get ready.
Pre-set control signal output time.
3)Meter-counting coefficient can be adjustable:
In order to improve the counting precision meter-counting coefficient can be set as per meter-counting wheel diameter change, different wire diameter and skid coefficient of different material.
4)Adopting many kinds of sensor:
This device uses photoelectric switch or electromagnetic switch as the measuring sensor. Electric pulse that sensor outputs is directly proportional to the length. The electric pulse is sent to the meter, after accumulating and calculation it can get the length. When the accumulated length reaches the pre-set value it will output alarm and control signal.
5) Main technical data:
Measuring scope: 1-150mm
Measuring precision: 0.1%
Measuring speed: Max. 400m/m
Countable length: 0~99999.9m
Accumulated length: 0~999999m
Service voltage: AC220V
Power consumption: <10W
6) We are specialized in making caterpillar meter counter for nearly 12 years. we have all our models in stock. So our delivery is very fast, we can send it to you as soon as we receive your payment. Warmly welcome you to inquiry about our product.
7) We can make a variety of cable machines as following:
1. Extrusion line
Chemical foaming extrusion line
Physical foaming extrusion line
Cored wire insulation extrusion line
Jacket extrusion line
Single twisting machine
Cantilever single twisting machine
High-speed single twisting machine
Horizontal high-speed single twisting machine
Vertical high-speed single twisting machine
Double twisting machine
Copper stranding machine
Bow-type stranding machine
Planetary stranding machine
Cage stranding machine
Crosswire stranding machine
Rigid frame stranding machine
Tubular stranding machine
Drum stranding machine
Triple-core stranding machine with back twist
Caterpillar haul-off unit
Taping machine
Numerical control horizontal single/double layer taping machine
Numerical control vertical single/double layer taping machine
Vertical micro-fine double-layer taping machine
Central taping machine
Wire cutting machine
Computerized automatic coiling machine
Packing machine
Take-up&pay-off
Testing equipment
Spark tester
Inductive wire preheater
Laser diameter gauge
Meter counter
Crossheads for extrusion line
Bobbins
Accessories
Reels
Crossheads for extrusion line
Magnetic powder clutches & brakes
Tensioner
Other spare parts
4) Q&A
1. Are you the manufacturer or trading company?
We are the 100% manufactuer with 3 big workshops covering over 100, 000.00 square meter. Warmly welcome you to visit our factory and conduct our work.
2. What's your factory's advantage over other manufacturers in the same industry?
- High output capacity will guarantee your high-efficient production
- We are very good at engineering. In order to make our machine have a very excellent performance, we are rigorously attaching importance to each detail in the course of manufacturing in a bid to improve our machines continuously.
- We only mount electrical components under famous brands like Siemens, Yaskawa, Scheinder and Omron on our machines to guarantee the quality of our machines.
- Our engineers and workers can work abroad, if you need us to assist you installing and testing the machines or training your staff how to operate and maintain our machines, we can send our team to your factory when our machines arrive at your factory.
- Guarantee period: We can guarantee one year for all our machines.
- After-sales service: We promise to provide permanent technical support and after-sales service with our customers.
3. Why do we trust your company?
We are gold supplier for many years and have agent in Europe. Up to now, we have exported our machines to many countries.
4. How can we go to your factory?
If you want to come to our factory on your own, we can pick you up at Guangzhou South Railway station. If you are sincere to purchase our machines we are very happy to pick you up if you need.
Wood Chipper,Portable Band Sawmill,Circular Sawmill,Co., Ltd. , http://www.nswoodmachine.com