Jinba Tanker

English: (Ba jin tanker)

Dongfeng Jinba tanker chassis is used, and Dongfeng Jinba chassis model EQ1040TJ20D3. The engine adopts Yuchai high-pressure common-rail fuel injection four-cylinder diesel engine. The emission standard is National III emission. The engine power is 66 kilowatts. Tyre model 6.50-16.

Automatic production line tank production process is divided into: cutting, automatic welding puzzle, head spin forming, tank rolling and other domestic advanced production technology. Tank materials are mostly made of high-quality carbon steel plates. In case of special use, it can also use imported Korean 304 stainless steel according to customer's needs. The tank volume is "3 cubic, 4 cubic, 5 cubic, 6 cubic, 6.5 cubic."

JinBa tanker can use centrifugal pump, gear pump, chemical pump and stainless steel pump according to the purpose. It has the characteristics of large flow rate, fast suction speed, etc. The design can realize pumping, pumping out of the table, pumping in, and pumping out. , self-flow over the table, but the table and other functions.

Jinba fuel tanker can use the on-board computer tax-controlled fuel dispenser or return flow meter for measurement. Edible oil can be measured with the edible oil computer meter. The refueling reel can be separated.

To drive the gearbox by the engine, the power take-off device installed on the gearbox drives the oil pump. The oil pump generates power to pump the liquid inside the tank into or out through the pipe network.

According to different uses, carbon steel, stainless steel, lining rotomolding, glass steel, plastic cans (polyethylene. Polypropylene), aluminum alloy and other materials can be selected.

1. The tank body is made of genuine carbon steel plate or stainless steel material of Wuhan Iron & Steel Co., Ltd. manufactured in accordance with international standards. It adopts a 9.5-meter large-scale coiling machine for molding at a time. The strength is higher, and it is safer and more durable. After the can body is molded, the high-pressure gas is leak tested to make the tank body. High strength, stable center of gravity, and smooth and safe vehicle transportation;

2. The front and back ends of the tank are blanked with a plasma CNC cutting machine, and then they are spin-pressed once with a spinning machine to increase the strength and do not allow manual knocking;

3. The tank body is welded with welding gas welding on the welding tooling station to ensure the quality of the tank weld seam. The length of the tank body adopts one-piece integrally welded longitudinal beam to ensure the strength of the tank body. The tank shall be treated with an overall shot peening process to eliminate weld stress and overall rust removal.

4, the use of international advanced technology, the use of car paint processing technology to enhance paint adhesion, uniformity, durability; the most advanced large-scale drying equipment, strict dust control, no pollution, so that the tank body shine;

Divided into oval tank, circular tank, square circular tank.

The Dongfeng oil tanker with 8 cubic meters or less is usually pressed with GB 4.0 carbon steel plate. The Dongfeng tanker with 8 cubic meters or more is repressed with GB 5.0 carbon steel plate, and the Dongfeng tanker with 30 cubic meters or more adopts GB 6.0 carbon steel plate. suppress.

Applicable to the transportation of diesel, gasoline, heavy oil, coal tar, vegetable oil, edible oil and other liquid substances.

1. Use the vehicle's oil pump to suck oil from other containers and inject it into the tank body of the vehicle.

2. Use the vehicle's oil pump to quickly withdraw the fuel from the vehicle's tank and fill it with other vehicles or containers.

Jinba tanker features:

JinBa Tanker This model is small in size, low in price, low in fuel consumption, large in volume, small in tonnage, especially suitable for refueling of construction machinery, and can also add oil to factories, mines, and boilers. The average user purchases this model within six months. You can recover this vehicle cost.

Drivers are driving on snow and ice, use snow chains. Must reduce the speed, to avoid rapid acceleration and emergency braking, rapid braking and sharp cornering at high speed is strictly prohibited, otherwise the car is prone to slipping and tailing phenomenon and cause accidents.

When drivers are driving on rainy roads, the speed should be controlled. It is best not to exceed 35km/h. When driving in rain, rainwater may enter the brake drum and affect the braking effect. Therefore, the brake pedal should be lightly pressed to check the brakes from time to time. The effect is to avoid sudden braking and sharp turn, otherwise it is easy to cause slippage and slippage and cause accidents.

When the vehicle is stopped, the accelerator pedal should be relaxed to reduce the speed. Evenly step on the brake pedal. After the car stops, depress the clutch pedal to put the transmission into neutral, and pull the manual valve back to the end to make it in a braking state. Turn off the power (turn the start switch key back to the LOCK position). Avoid parked vehicles on steep slopes. If you have to park on the slope, you must use padding to fix the wheels. After driving, the exhaust pipe is in a high temperature state. Therefore, it is not allowed to park vehicles near inflammables such as withered grass. When naps in the car, the engine must be stopped. During a nap, accidents may occur due to touching the shift lever and pedals.

When a driver drives a tanker on a foggy day, he should light the fog light and drive at a low speed. Pay attention to the markings on the center line of the road and the taillights of vehicles driving ahead. If the fog is heavy, stop driving and park the car in a safe place. At the same time, turn on the distress alert switch so that both the front and rear left and right turn signals will flash at the same time.

Transport name: Gasoline, Density: 0.7 t/m3; Class number: 3; Effective volume of the tank: 2.2 m3; Tank size (long/long axis/short axis) (mm): 3000 (actual length 4000 Of which 1000 is used to install the tanker)/1300/800. With the optional chassis cab. Protective material: Q235A carbon steel, connection method: the left and right side and the rear lower protection are welded connection, the rear protection section size (mm): 200 × 60 × 5, the rear protection from the ground height (mm): 520. The car can be equipped with Burleigh, Zhengxing, Hengshan, Walter NC refueling machines, the model corresponding to SKDS-2001A, SC20D1110F, HS1812B

Tanker special function description:

Tank material: carbon steel, stainless steel, steel lined plastic, glass steel, plastic tank (polyethylene)

Can type: square round, oval, round

Oil pump: self-priming pump, gear pump, chemical pump, stainless steel pump

Oil gauge: single counting, double counting, tax-controlled fueling machine

Function: Can separate positions, can be divided into different oil products, chemicals, food. Designed to achieve pumping, pumping out of the table, the pump into the pump but the table, self-flow over the table, but the table and other functions.

Tankers can be designed as chemical vehicles.

Tankers can be equipped with computer fuel dispensers.

The wide range of tonnage of tanker trucks is selected to meet the needs of users.

Multiple anti-wave partitions are installed in the tank body. The use of high-pressure gas leak detection, so that the tank has high strength, stable center of gravity, vehicle safety and stability.