In the future, sitting in the vehicle dispatching information center, you can see the specific information such as the fuel consumption and location of each sanitation vehicle in the jurisdiction. December 18, 2014, reporters from Shijiazhuang Xinhua District Health Team "fuel management systems and vehicle scheduling system" project results report meeting was informed that, as of now, the Xinhua district health team has completed 128 environmental sanitation vehicles, 188 sets of fuel consumption The installation, commissioning and acceptance of the instrument was tested for more than three months, saving more than 300,000 yuan in oil costs. This is the first system in the national sanitation system to install this management system on the work vehicle. Next, it will also The vehicle dispatch platform has been constantly upgraded and is expected to be promoted throughout the city.
"No. 3 car, your instantaneous oil is too high, please note." Yesterday afternoon, the reporter saw in the monitoring room of the vehicle scheduling information center of the Xinhua District Health Team, the monitoring screen can display the position and speed of all the working vehicles in real time. Instantaneous fuel consumption. At the same time, the system can also form daily reports, monthly reports and annual reports. After these statistical data are collected, drivers can adjust their driving methods according to their daily conditions to reduce fuel consumption. "If the sanitation vehicle exceeds the scope of work, this system can also alarm." In the scene, there is a sanitation work vehicle beyond the scope of work, the monitoring room immediately sounded an alarm sound.
It is reported that "fuel consumption management system and vehicle scheduling system" is roughly divided into three parts: data acquisition and recording, remote control and management, and suspected oil theft alarm. "Simply put, it is divided into the software system shown on the big screen, and the hardware system installed on the vehicle." The person in charge said that the system is based on the fuel consumption meter, developed a remote management platform, the system to meet the fuel consumption At the same time as management and vehicle scheduling, it also developed super-zone alarms, speeding alarms, fuel consumption alarms, maps, and other functions in accordance with the actual conditions of sanitation work.
Since the system vehicle dispatch function is mainly realized through gps and walkie-talkies, the Xinhua District Health Team has also installed a digital walkie-talkie for each work vehicle, established a relay station at the same time, and applied for frequency points to the Wireless Committee to ensure the entire area. All areas can call for success. At the same time, a vehicle dispatching information center has also been set up. The staff is responsible for managing the dispatch 24 hours a day.
The reporter saw that in the information center, the staff collected data on the fuel consumption, mileage, and working time of the fuel consumption meter in real-time and collected statistics on each day, thereby clarifying the amount of fuel, the actual fuel consumption, and the presence of oil in each vehicle. Abnormal conditions, etc., effectively reduce the oil material storage, and can display the frequency of prompts, the illegal operation of the work vehicle to notify the first time the rectification.
"This project was launched in July this year, and it was commissioned in early September. At the end of November, the hardware and software systems of the entire project were accepted." Wu Xiaofeng, head of the Xinhua District Health Team, said that the Xinhua District Sanitation Team is the first one in the national sanitation system. Vehicles equipped with fuel consumption management and vehicle dispatch systems. Up till now, Xinhua sanitation has completed the installation, commissioning and acceptance of 128 sanitation vehicles and 188 fuel consumption meters. Since the system was commissioned for three months, it has performed well and has achieved remarkable results. The fuel saving rate is between 25% and 30% per month, saving more than 300,000 yuan in oil costs.
Description of Adjustable manual vacuum suction crane: The product can load of 600 kg.
It can be used without external power supply. The suction, release and rotation of the suction cup are all controlled by remote control. Each suction cup has a separate switch which can be used as required, and the suction cup holder has a telescopic rod which can be installed or removed as required. The equipment and electrical components are manufactured by the Schneider brand of France, and the vacuum pressure control adopts the German Festoon brand, the electromagnetic valve and the pressure gauge and the filter adopts the Japan SMC, the remote controller adopts the Taiwan Yuding brand, and the gas pipe adopts the German Festoon and the Taiwan Airtac brand, and the sucker is a silicone suction cup.
Glass Lifter,Suction Lifter,Glass Lifting Equipment,Glass Lifter Suction Cup
JINAN KATION TRADING CO.,LTD , https://www.machinerychinese.com