Previous vehicles were operated by manual transmission. Since the automatic transmission was put into use, people have gradually begun to trust and trust automatic transmissions. Now that you can use the brakes and the transitions between the throttles, you can easily operate the mobile stage car, but you have to maintain it well. Good operating habits at the time will reduce the damage of the automatic transmission of the stage car .
1, when the flow of the stage car requires a long time to stop, some drivers will inertially hang the D lever above the file. For example, if the traffic situation is not very good, if it can be eased in a minute or two, it does not matter if you hang on D. However, if the traffic jam is serious, then it is best to hang the lever on the neutral or N-range, and the parking brake must be tightened. Otherwise, the oil temperature of the transmission will gradually increase when it is hung on the D-range. The increase will result in deterioration of the fluid.
2. Some owners of mobile stage cars will change the shift lever to N-slide on the road that runs downhill. This is very likely to cause the possibility of the automatic transmission burning down. If it is true that you need to coast on a downhill road, you can keep the gear at D, but you can't turn off the engine. This is not a wise move to save fuel.
3. When a moving stage vehicle is parked on a relatively steep section of the road, not using a parking brake will result in a greater safety risk. Although the current stage stage vehicle is equipped with an automatic transmission, when placed in the P position, the transmission has a locking device to lock the gear, which can play a certain anti-sliding effect on the vehicle, but the power to lock the car with the handbrake It cannot be compared.
5 Axis Machine,5 Axis Milling Machines,Cnc Milling Machine 5-Axis,5-Axis Milling Machine
Dongguan Liyang Intelligent Technology Co., Ltd , https://www.leyomachine.com