What is the purpose of implementing the anti-skid control of the sprinkler?
When the car starts or accelerates, if the throttle opening is too large and the driving force of the sprinkler is greater than the friction of the road, the phenomenon of “slipping†in which the wheel speed of the driving wheel is higher than the speed of the center of the wheel often occurs. The more slippery the road surface, the more obvious this phenomenon is. This kind of slip can cause the driving force of the car to drop, and at the same time it can cause the lateral sliding of the wheel. The latter means that the car may have the potential safety hazard. The basic reason is that when the ground contact point of the tire and the ground appear to slide relative to each other, the vertical friction coefficient of the wheel and the ground will be reduced and the transverse friction coefficient will be lost.
In order to avoid the occurrence of the above situation, it is necessary to control the driving torque of the driving wheels in the driving state, and if necessary, it is possible to rely on the control system to rapidly reduce the driving torque on the driving wheels so that the sprinkler wheels can get rid of the possibility of slipping. The anti-slip control system can be specifically designed to prevent the drive wheels from slipping when starting, accelerating, and driving on slippery roads, so that the vehicle can start and accelerate smoothly. What is the function of the universal transmission and how is it applied in the car? Power is transmitted from the engine to the wheels and it needs to pass through the universal transmission.
The applications of the universal transmission in the automobile mainly include the following aspects: the transmission and the transmission shaft and the transfer and transmission shaft. Between the transmission and the transfer of the sprinkler. The axles of the steering axle of the automobile are segmented. When the two axles of the steering axle cross each other and the angle of intersection changes, the universal joint is used. Broken axle shaft: The main reducer shell is fixed on the frame, the axle housing is swinging up and down, the half shaft is segmented, universal joint is needed. Between the steering rod and the steering gear assembly.
XCMG Chu Sheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd. The main varieties are: garbage trucks, sprinklers, suction trucks, sewage suction trucks, road sweeper vehicles, aerial vehicles, fire engines, plus (transport) oil trucks, trucks Crane, bulk cement, powder material transport vehicles, vans, cement mixers, dump trucks, semi-trailers and other series of products. The company designs innovative, reliable products to meet the needs of domestic and foreign customers. We will always follow the principle of quality first, reputation first and service first. We will return to society with real and reliable products and warm and thoughtful service.
Welcome to inquire: Sales Manager (Xu) 15672996222
Oxygen Generator,Oxygen Plant For Hospital,Oxygen Plant Compressor,Oxygen Plant Equipment
Jiangsu Minnuo Group Co.,Ltd , https://www.jsmngroupcn.com