What operating procedures must be mastered when using gantry machining centers?

The gantry machining center has a fixed beam type (fixed beam, table movement/rotation), movable beam type (beam moving up and down, table moving back and forth), moving column type (table fixed, gantry moving), crane type (work Station fixed, beam moving) There are also multiple types of gantry machining centers in the above composite form. The processing characteristics, capabilities, and targeted product processing are not exactly the same. It refers to the machining center where the axis of the spindle is set perpendicular to the worktable. It is mainly used to process large parts.

Operating procedures:

1. The operator should be familiar with and master the performance and characteristics of the Gantry machining center machine. Ensure that the emergency stop switch can function quickly and effectively to avoid injury when an emergency occurs.

2. Wear protective clothing as required, but do not wear gloves.

3. Do not touch the electronic switch with wet hands to avoid electric shock when the device is in operation. Do not touch any moving parts with your hands.

4. Do not place tools or non-machining workpieces on gantry machining centers or moving objects.

5. The computer table or work table next to the machine must be strong and must not be placed on the moving part.

6. When moving the workpiece up and down, stop the machine and pay attention to the proper distance between the workpiece and the tool. While the machine is running, do not open the front door and left and right covers to avoid personal injury.

7. After the tool has finished setting, run it with DRYRUN to confirm that the program is correct.

8. When the power is off or the power is turned off after an emergency stop, the three axes should be restored to the original position of the machine.

9. Do not remove the trip switch or any related parts of the protective switch.

10. Before turning off the work leaving the machine, turn off the control panel power switch and electrical box main switch of the operation panel.

STONE WORKING Cnc Router

This cnc router is designed for stone working, could cut, engrave and drill on marble, granite, travertine, limestone, onyx, soapstone, slate, quartzite etc, suitable for fireplace, countertop, sink, desk in kitchen, bathroom, residential, hotel, office building etc.

Advantages of Stone Cnc Router:

• Three axises adopt imported linear orbit, two line sliding track, heavy loading, stable working, high precision, longlife time.
• Whole seamless weld steel structure, wheels on cnc router table, not easy to distort, the table back lining is armor plate, good rigidity, the machine can bear 1 MT at least.
• Constant power spindle and motor, strong cutting capacity, high efficiency,Well compatibility, compatible software CAD/CAM, such as Type3,  Artcam, Castmate, Wentai, CorelDraw.

Product Application:

1. Suitable for natural marble, granite, bluestone, sandstone, artificial stone, tombstone, milestone, ceramic tile, jade, crystal, ceramics, glass, plastic, wood, bamboo, cambered surface, sphere, stainless steel, iron, copper, aluminum, titanium alloy, can doing 3D embossment, and line engraving, beveling, drilling 2D engraving.
2. Such as granite stone can be layered engraving to 3mm.
3. Marble, bluestone can be engraving to 3mm on time.

4. Engraving characters, letters, pattern, intaglio, rilievi, handwriting, ancient calligraphy, abraziune colored drawing, flat carving colored drawing, etc. on stone, glass, depth can control optionally, to reach the artistic effect.

Main Features:

★ Heavy duty Machine structure, good weight bearing capacity, not easy to deformation, the special machine bed design, can bearing more than 2000kgs materials.
★ The special designed Zaxis, can increase the stone relief accuracy, can solve the Zaxis belt or ball screw breaking problem thoroughly.
★ The water proof and dust proof system for X Y Zaxis, can protect all the parts, reduce the machine fault, enlarge the life time.
★ High-performance driven motor to ensure that the machines high speed and accuracy.
★ Using well-known domestic brands of water-cooled brushless spindle, low noise, strong cutting ability, to ensure the long time working.
★ Easy to use Mach 3 controller works with all industry standard CAD/CAM software(optional, Nc-studio, DSP controller)
★ High grade Hiwin square rail
★ XY axis German helical rack and pinion
★ Z axis high precision TBI ball screw
★ 900*1500mm, 1300*1800mm, 1300*2500mm, 1500*3000mm,1800*2500mm standard sizes (Special sizes available upon request.)

★ 1 spindle, 2 spindles or 3 spindles available upon request.

Technical parameters:

Items	Parameters
Working area(mm)	1300*2500*200mm/1200*1200mm, etc.
Table Structure	T-slot table
Transmission system	X,Y axis Gear Rack transmission,z axis Ballscrew from Taiwan but with German technology
Lead rail system	Linear round guide rail
Spindle power	5.5 kw Water-cooling ,3.175/4/6/12.7mm
spindle speed	0-24000 rpm
Motor	stepper(Panasonic/Yaskawa optional)
Drive	stepper(Panasonic/Yaskawa/hybrid optional)
Dust collector system	For your option
Inverter	7.5kw Fuling inverter
Software environmant	Windows 98/2000/XP
Control System	DSP A11/Mach3/Nc-studio controller
Compatible file formats	G code; *.u00 ; *.mmg ; *.plt .
Compatible CAD/CAM Softwares	Ucancam V8 / Type3 / Artcam /
Working Voltage	AC380V,3ph, 50Hz
Precision	0.005mm
Max speed	26.0m/min
Max engraving speed	18.0m/min
Max feeding height	200mm
Work-holding devices	by fixture
Interface type	USB
Warranty guarantee	One-year after-sale services

Professional Stone Cnc Router

Professional Stone Cnc Router,Stone Cnc Router,Stone Engraving Machine,Stone Engraving Equipment

Shandong U-May CNC Technology Co., Ltd. , https://www.fiberlasers.de