Dongfeng special business front four rear four tank car chassis detailed parameters: the use of Dongfeng special business small three-axis. New luxury interior cab, large logo LOGO, high-strength bumper, Yuchai 220 horsepower, 5T front axle, 280 beam, ( Kang machine 210 horsepower, 3.6T front axle, 250 beam) with ABS, speed limiter, disc brake. Shaanxi tooth 8 gear box, 10.00R20 wire tire.
Tank modification parameters: the maximum volume of the tank: 27.3 square, (can be loaded with 23.2 tons of diesel) with two tanks of the same length of suction pipe, special oil pump, with locks, fire extinguishers, fire helmets and so on. The top of the tank has a telescopic guardrail and a pattern walkway. The tank body is made of 6mm thick high-quality large-scale carbon steel sheet, which is completely formed by seamless molding. It has European standard tank mouth and submarine valve (optional bottom port according to local policies and requirements, probe probe, oil and gas recovery) ). The tank and each bumper are attached with visual reflective strips, and the word "explosion" is attached. Our factory has passed the ISO9001-2000 international quality system certification, and the products have passed the 3C certification. It is a well-known brand in Hubei Province and a reliable product in Hubei Province.
Total mass (Kg) 24300
Tank volume (m3) 23
Rated load mass (Kg) 15350
Dimensions (mm) 10250, 10550 × 2490 × 3300
Curing quality (Kg) 8755
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 3
Load mass utilization factor
Approach angle / departure angle (°) 30/11
Front overhang / rear overhang (mm) 1250/2800, 1450/2600
Number of axes 3
Wheelbase (mm) 1950+4000, 1950+4250, 1950+4550, 1950+4950
Axle load (Kg) 6500/6500/11300
Maximum speed (Km/h) 80
Others 1, transportation medium: gasoline, category number: 3, density: 700 kg / cubic meter; effective volume of the tank: 23 cubic meters, tank dimensions (mm): 7500 × 2450 × 1750, 7800 × 2400 × 1700 . Shape length / wheelbase / front overhang / rear overhang / tank size (mm) Correspondence: 10250/1950 + 4250 / (1250 / 2800, 1450 / 2600) / 7500 × 2450 × 1750; 10550/1950 + 4550 / ( 1250/2800, 1450/2600) / 7800 × 2400 × 1700. 2, side protection left and right symmetry using cold-formed steel / Q235, bolted. The rear protection is made of cold-formed steel/Q235, welded, with a section height of 100mm, a section width of 50mm, and a lower edge of 500mm from the ground. 3. Optional cab with chassis, only the chassis with radial tire, speed limit device and front disc brake; the vehicle should be equipped with a tachograph with satellite positioning function; ABS model: 4S/4M, manufacturer: Wilbur Branch Automotive Control Systems China Ltd.; engine and fuel consumption (L/100Km) correspondence: ISB190 40/39.31, ISB210 40/39.42, YC6J220-46/40.55.
Auman's first four rear tanker tanks effective volume: 25 cubic meters, the maximum volume of 27 cubic meters, tank dimensions (mm): 7400 × 2450 × 1800. 210 horsepower machine country four engine, Datong seven gear shift Box with power take-off, 10 tons rear axle, 10.00R20 steel wire tire, ETX2200 flat top, 380L aluminum alloy fuel tank, air conditioning, front disc brake, ECU electronic speed limit, ABS, exhaust pipe front.
ã€The main technical parameters】
Product trademark Chusheng
Bulletin Lot 257
Product Name CSC5253GYYB4 Oil Tanker
Product No. ZL2NN4D701W
Total mass (Kg) 25000
Tank volume (m3) 25
Rated load mass (Kg) 16700
Dimensions (mm) 10350×2490×3350
Curing quality (Kg) 8105
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 3
Load mass utilization factor
Approach angle / departure angle (°) 18/13
Front overhang / rear overhang (mm) 1365/2325
Number of axes 3
Wheelbase (mm) 1860+4800
Axle load (Kg) 6750/6750/11500
Maximum speed (Km/h) 79
Others 1, transportation medium: gasoline, category number: 3, density: 700 kg / cubic meter; effective volume of the tank: 25 cubic meters, tank dimensions (mm): 7400 × 2450 × 1800. 2, side protection around Symmetrical use of cold-formed steel / Q235, bolted. The rear protection is made of cold-formed steel/Q235, welded, with a section height of 100mm, a section width of 50mm, and a lower edge of 500mm from the ground. 3. Only use the chassis with radial tire, speed limit device and front disc brake; the vehicle should be equipped with a tachograph with satellite positioning function; ABS model/manufacturer: ABS-E, 3550X-1010 WABCO car control system ( China) Co., Ltd., Dongfeng Electronic Technology Co., Ltd.; engine and fuel consumption (L/100Km) correspondence: ISDe210 40/37.23, ISDe245 40/37.31. (This article comes from Xiagong Chusheng)
Tube sheet are usually made of a round flat plate with holes drilled into the plate to accommodate tubes in the exact location and pattern relative to each other. The tube sheet is used to support and isolate the tubes in the Shell And Tube Heat Exchanger.
A tube sheet is a plate used to support a tube in a shell and tube heat exchanger. The tubes are aligned in a parallel manner and are supported and held in place by the tube plate. A tube sheet is a round plate with holes in it so that the tube can fit through the opening. Tubes are usually made of round, flat metal sheets. Drill holes for pipe ends in precise locations and patterns relative to each other. The tube plate is made of the same range of materials as the pipe.
These are usually made of mild steel and vary in thickness according to fluid pressure. Depending on the final application (petrochemical, nuclear, oil and gas, etc.), the tubes can be clad in stainless steel or other superalloys, or even made entirely of stainless steel or superalloys.
Tube Sheet,Boiler Tube Sheet,Floating Tubesheet,Exchanger Tube Sheet
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com