Application:
PTK/PTM series actuators can run continuously in multiple turns, they can be connected directly with the valves,
such as gate valves, globe valves. The maximum output torque is 3500N.M.
Advantage:
PT/PTJ Series Mechanical Features:
1.Compact structure, using advanced manufacturing technology and same imported parts of the top brand of the actuator industry.
2.Non-intrusive design, without opening the electric box cover, debugging and parameter setting can be carried out.
3.Double seal and double protective structure, completely waterproof and dust-proof, the protection grade is IP68
( 3 meter for 48 hours).
4.Explosion-proof grade can up to Ex d IIC T6.
5.Terminal Connection, the connection scheme adopts two ways for customer to choose, plug connection and sunflower disk form.
6.Housing, cast aluminum housing powder-coated for extreme environments. Optional coatings are available. High strength Ductile Iron used in large torque Box.
7.Worm and worm gear, Long-life gear set consists of hardened alloy steel worm and bronze worm gear. It is completely bearing-supported.
8.Stem nut, High-strength bronze alloy stem nut is removable for machining to suit the valve stem.
9.Declutch lever enables the actuator to be placed in manual, handwheel drive operation. Lever automatically disengages when motor is energized and can be padlocked in the motor position.
10.A variety of mounting types with valve and valve stem.
11.Painting, using three layer for protection, can be applied in severe corrosive environments.
12.Lubricating oil, high and low temperature maintenance-free lubricating oil
PT/PTJ Series Protection Features
1.Torque protection
2.Valve limit protection
3.Auto-phase protection and correction
4.Instantaneous reversal protection
5.Phase lost protection
6.Motor start-up overtime protection
7.Motor thermal protection
8.Electric protection,optoelectronic isolated (withstand 2000V surge voltage)
9.Jammed valve discharged automatically function
10.Power-down data protection
Â
| PT Series Technical Parameters | eg:PTK,PTM,PTK/D,PTM/D,PTKT,PTMT,PTK/W,PTM/W Series |
| Item | Technical Data |
| Power supply (External) | 3 Phase: 380VAC,-10%/+10%,50Hz±1%; 1 Phase: 220VAC,-15%/+10%,50Hz±1% |
| Internal control power | Unstabilized 24VDC power output |
| Valve position control basic error | ≤±1.0% |
| Hysteresis | ≤1.0% |
| Deadband | 0.1%-9.9% ajustable |
| Temperature |  -30ºC~+70ºC ( Optional -60ºC~+120ºC) |
| Output turns | 10~2040 Turns, resolution 11.25° |
| Valve position feedback basic error | ≤1.0% |
| Rated stroke time error | 20% |
| Clearance | ≤3° |
| Repeatability error(Setting stroke time≥25S) | ≤1% |
| Torque output | Direct drive, 10 Nm to 3,600 Nm; combined with a gearboxes, up to 15,000 Nm |
| Electric connection | Water proof W type: 1 * M40x1.5, 2 * M25x1.5; Explosion proof E type: 1 * G3/4", 2 * G1/2"; Other connections can be specified at time of enquiry |
FAQ
1)Â Q :How long is your products quality warranty?
A: We provide one year factory quality warranty.
Â
2)Â Q: Can your factory print our brand on the products ( or package ) ?
A::Our factory can laser print customer's logo on the product with the permission from customers.We need an
authorization letter from you to allow us to print your logo on it .
Â
3)Â Q : Can I visit your factory before order ?
A::Sure, welcome to visit our factory. .Please schedule an appointment with us in advance.
Â
4)Â Q: What payment method do you accept ?
A::T/T, L/C, Western Union, Escrow, Credit Card etc.
Â
5) Q: How dose your QC work ?
A:Â We execute 100% inspection.
Products will need reworking in workshop if inspection fails.
We stick to checking quality , cartons, Packaging / markings.
Product/Â Style / Color Appearance and Workmanship Measurement Data.
High quality high pressure control valve electric motorApplication:
PTK/PTM series actuators can run continuously in multiple turns, they can be connected directly with the valves,
such as gate valves, globe valves. The maximum output torque is 3500N.M.
Advantage:
PT/PTJ Series Mechanical Features:
1.Compact structure, using advanced manufacturing technology and same imported parts of the top brand of the actuator industry.
2.Non-intrusive design, without opening the electric box cover, debugging and parameter setting can be carried out.
3.Double seal and double protective structure, completely waterproof and dust-proof, the protection grade is IP68
( 3 meter for 48 hours).
4.Explosion-proof grade can up to Ex d IIC T6.
5.Terminal Connection, the connection scheme adopts two ways for customer to choose, plug connection and sunflower disk form.
6.Housing, cast aluminum housing powder-coated for extreme environments. Optional coatings are available. High strength Ductile Iron used in large torque Box.
7.Worm and worm gear, Long-life gear set consists of hardened alloy steel worm and bronze worm gear. It is completely bearing-supported.
8.Stem nut, High-strength bronze alloy stem nut is removable for machining to suit the valve stem.
9.Declutch lever enables the actuator to be placed in manual, handwheel drive operation. Lever automatically disengages when motor is energized and can be padlocked in the motor position.
10.A variety of mounting types with valve and valve stem.
11.Painting, using three layer for protection, can be applied in severe corrosive environments.
12.Lubricating oil, high and low temperature maintenance-free lubricating oil
PT/PTJ Series Protection Features
1.Torque protection
2.Valve limit protection
3.Auto-phase protection and correction
4.Instantaneous reversal protection
5.Phase lost protection
6.Motor start-up overtime protection
7.Motor thermal protection
8.Electric protection,optoelectronic isolated (withstand 2000V surge voltage)
9.Jammed valve discharged automatically function
10.Power-down data protection
Â
| PT Series Technical Parameters | eg:PTK,PTM,PTK/D,PTM/D,PTKT,PTMT,PTK/W,PTM/W Series |
| Item | Technical Data |
| Power supply (External) | 3 Phase: 380VAC,-10%/+10%,50Hz±1%; 1 Phase: 220VAC,-15%/+10%,50Hz±1% |
| Internal control power | Unstabilized 24VDC power output |
| Valve position control basic error | ≤±1.0% |
| Hysteresis | ≤1.0% |
| Deadband | 0.1%-9.9% ajustable |
| Temperature |  -30ºC~+70ºC ( Optional -60ºC~+120ºC) |
| Output turns | 10~2040 Turns, resolution 11.25° |
| Valve position feedback basic error | ≤1.0% |
| Rated stroke time error | 20% |
| Clearance | ≤3° |
| Repeatability error(Setting stroke time≥25S) | ≤1% |
| Torque output | Direct drive, 10 Nm to 3,600 Nm; combined with a gearboxes, up to 15,000 Nm |
| Electric connection | Water proof W type: 1 * M40x1.5, 2 * M25x1.5; Explosion proof E type: 1 * G3/4", 2 * G1/2"; Other connections can be specified at time of enquiry |
FAQ
1)Â Q :How long is your products quality warranty?
A: We provide one year factory quality warranty.
Â
2)Â Q: Can your factory print our brand on the products ( or package ) ?
A::Our factory can laser print customer's logo on the product with the permission from customers.We need an
authorization letter from you to allow us to print your logo on it .
Â
3)Â Q : Can I visit your factory before order ?
A::Sure, welcome to visit our factory. .Please schedule an appointment with us in advance.
Â
4)Â Q: What payment method do you accept ?
A::T/T, L/C, Western Union, Escrow, Credit Card etc.
Â
5) Q: How dose your QC work ?
A:Â We execute 100% inspection.
Products will need reworking in workshop if inspection fails.
We stick to checking quality , cartons, Packaging / markings.
Product/Â Style / Color Appearance and Workmanship Measurement Data.
Information of company and product
1)Wire diameter(thickness): 0.15mm to 50mm
2)Material: Carbon steel(SWC), cold roller steel, stainless steel(SUS),
beryllium copper, phosphor copper, brass, music wire or piano wire
(SWP), 60Si2Mn, 55CrSi etc
3)Finish: blacking, zinc/nickel/chrome/silver/gold plating, powder
coated etc
4)Application: Electronic products, Children`s toys, Locks, Watches, Glasses,
Baby carriage, Bicycle, Kitchen appliances, Cameras, Printers, Office
equipment, Precision equipment and various kinds of vehicles
Professional Customize Metal Stamping,Custom Stainless Steel,Brass Stamping Parts,Metal Stamping Press
Baoding Henglian Mechanical Co.,Ltd , https://www.hengliancasting.com