Now used cars are quite fierce in the market. There are many kinds of cars. There are top-notch used cars and used cars that have been retrofitted with good cars. How to pick precious treasures in the dazzling used car market. Cars, it is necessary to have a certain ability to identify.
The simplest and most basic method of identification is to observe the appearance of a used car by first selecting a flat surface and then driving the vehicle to a pre-selected position, standing in front of the car body, by comparing whether the two sides of the car are constructed or not. At the same level, if it is not, it can be speculated that the car has undergone some maintenance or modification before. Then, close to the car body, carefully inspect whether there is a certain gap in the material-enclosed material joints of the car body. If there is and the combination of the two parts is not very coincident, it can be initially determined that the car undergoes certain modifications and adjustments.
Although the appearance of the detection is simple and easy to implement, the inspection result is not accurate. If you want to accurately identify used cars, you also need to go deep into the interior of the vehicle for precise inspection. The first is the identification of the car engine. Before checking the engine, it is necessary to see if the left and right windows and the protective mirror of the car are intact and have no traces of scratches. After the implementation of this series of measures, the engine of the car was inspected, and it was observed whether the constituent materials were damaged or not, and whether the stored oil was overflowed. Observe whether there is any sign of leakage of oil on the outer surface.
After inspecting the internal structure of the car, the interior of the car body began to be identified. The most basic is whether there is obvious deformation in the chair and back of the driver's seat, and whether the seat covers on other seats are clean and there are signs of cleaning or replacement. Also, special attention should be paid to whether the interior of the car remains in its original state and whether there is any defect in some equipment. In particular, it must not be forgotten that it is useful to check whether the control handle and brake parts of a car are flexible and convenient to use.
The appraisal of second-hand cars is not as simple as imagined. No matter whether it is the observation of appearances or the detection of internal equipment, it cannot be taken lightly. Only through detailed examination can an accurate identification of used cars be made.
CH/CS Cone Crusher
(1) CH/CS Cone Crusher is a single cylinder hydraulic structure. The equipment is designed according to heavy-duty working conditions. The main shaft is supported at the upper and lower points, and the stress conditions are good.
(2) The constant crushing chamber (CLP) design keeps the feeding and production capacity constant during the liner wear cycle, significantly reducing the operating cost.
(3) Up to ten kinds of cavity shape changes and up to four kinds of eccentricities can be set for an eccentric sleeve bushing, which greatly enhances the flexibility and adaptability of the equipment.
(4) Equipped with intelligent ore outlet adjustment system ASRI, the performance of the crusher can be maximized.
(5) Advanced liner wear monitoring and automatic compensation functions, operation data record query functions, and convenient network communication functions can significantly improve the maintenance level of equipment and optimize the coordination and control with other equipment in the system.
(6) Compared with CH type, CS type crushing chamber is higher and steeper, with larger feed inlet and larger carrying capacity. It is suitable for secondary crushing when the feed particle size is large. Its lower frame is interchangeable with CH crusher of the same specification.
Ch/Cs Main Shaft Assembly,Indispensable Retaining Ring,Important Retaining Ring,Hot Sale Retaining Ring
Shenyang Ule Mining Machinery Co., Ltd , https://www.ulecrusherparts.com