As people's demand for energy is increasing, the intensity of oil field exploitation is also increasing. However, the characteristics of each oil field and the amount of oil contained are different, so the characteristics adopted for different oil fields are adopted. The method of oil production is also not the same. For now, there are two main types of oil extraction: self-spraying and mechanical oil recovery.
However, with the continuous development of oil fields, the formation energy is gradually consumed, and many oil fields can no longer use the traditional oil extraction method for oil recovery. This requires the use of mechanical oil extraction methods for oil production. Moreover, the use of mechanical oil extraction method is more flexible and more flexible than traditional oil extraction methods, and the mining cost is even lower. Therefore, the share of oil fields using mechanical oil recovery methods in China has reached more than 90%.
In order to increase the oil production of oil fields, as early as the 1970s, China imported oil extraction vehicles from the United States, which was specially designed for oil wells with low or no self-injection. At present, China has already developed its own independent brand to meet the needs of oilfield operations. The development of oil extraction vehicles mainly involves two types of vehicles: one is a front mast type oil extraction truck, and the other is a derrick rear type oil extraction truck. The basic structure of the two types of oil extraction vehicles has not changed much, so we will focus on the front-mounted mining trucks.
The mast-type oil extraction truck uses a boring bar to put the wire rope and puller into the wellhead. The winch of the boring rod type oil recovery vehicle is located at the rear of the vehicle. The boring bar is arranged at the front of the vehicle, and the crane wheel at the front of the boring bar is at the front of the cab. The oil production is basically completed in the cab. During operation, the wire rope is passed from the winch through the inside of the mast and forward through the crane pulley into the well.
The mast-type oil extraction truck has the characteristics of large lifting capacity and is not limited by the construction site, and is more suitable for the use of sites with poor wellhead locations. However, because of the need to install more cables when in use, it is difficult to move, and the lifting radius is also limited. Therefore, flexibility is not as good as a rear-mounted oil recovery vehicle, and it is generally used in oil fields where the wellhead is concentrated and the site is narrow.
The oil extraction truck is a specialized vehicle with a very strong speciality, and the mast-type oil extraction vehicle is an important branch of it. It can quickly adapt to wells of different terrains and help the workers to timely and quickly extract oil. It is a professional profession. A great tool for oil production, so when you encounter oil wells that are difficult to extract, try a mast-type oil extraction vehicle.
Application:
Medium-hard gear reducer is widely used in transmission mechanism of transportation, metallurgy, mine, chemical industry, light industry and so on.
Product characteristics:
1. Wide range of deceleration ratio, nominal speed ratio 10-200;
2. The efficiency of mechanical transmission is high, the second is 96 and the third is 94;
3. Smooth operation, low noise;
4. Because of the use of 42CrMo, 35CrMo is forged and quenched and tempered, the gear shaft and gear are made respectively, so it has long service life and high bearing capacity.
5. Easy to install
application condition:
1. The circumferential velocity of the gear is not greater than 16m / s;
2. The speed of high speed shaft is not more than 1000rr / min;
3. The working environment temperature is -40 ℃ 45 ℃.
Factory Introduct
workshop show
Factory Equipments
Luoyang Hong Xin Heavy Co., LTD. is located in Luoyang Xin'an Industrial Park, Luoyang Hongxin Heavy Machinery Co., Ltd is an enterprise featured with industrial designing, processing and manufacturing, which is qualified for import-export trade. Covering an area of 15,000 square meters and holding an annual production value of 80 million RMB, the company of 20 million RMB registered capital has total 100 staff members, among which there are 20 engineering technicians owning senior and medium professional titles and 40 intermediate and senior technicians capable of product designing and developing.
Hongxin is dedicated to produce reducers, hoists, crushers, Ball Grinding Mills and the equipments of screening, coal washing, metallurgy and cement, and replacement parts. Meanwhile, we provide the perform maintenance service for various series of equipments. There are 52 large-scale equipments applied into the manufacturing process, such as T200 CNC floor boring and milling machine, YK 73125 CNC molding gear grinding machine, YK322B CNC molding gear grinding machine, Y3200 gear hobbing machine, Y1600 CNC gear sharper, 4m vertical lathe, 6.3m CNC vertical lathe, T110 CNC boring machine, and 52 middle-sized productive and assistive equipments, which integrate strong manufacturing and processing capability with complete managing system of production and technology, quality management system and comprehensive testing
measures
Medium Hardened Gear Reducers,Medium Harden Gear Speed Reducer,Parallel Shaft Gear Reducer,Medium Harden Surface Gear Reducer
Luoyang Hongxin Heavy Machinery CO., TLD. , https://www.hxreducer.com