After the onset of summer, the rainy season really came. Traveling on a rainy day increases the difficulty of traveling for pedestrians, but at the same time, it is also a difficult problem for car owners who choose to travel by car. Today, the author wants to use this article to let everyone have a deeper understanding of the experience of safe driving in rainy days.
First of all, we need to know what risks are there in the rain. The specific performance is as follows: First, the traffic conditions in rainy days are more complex than usual. This leads to dangerous situations in the driving process. Either a sharp turn of the steering wheel or slamming on the brakes can easily cause the vehicle to deviate from the direction or even skid. The phenomenon occurs. Secondly, if the wiper is faulty, the front windshield will be misty, and the rear view mirror will have rainwater. In either case, it will affect the driver's eyesight. Third, if there is a wading lot, the brake braking distance is longer than usual. Fourth, if the lighting is unreasonable, it will mislead the rear vehicles.
Second, for these risks, how can we do preventive measures to effectively avoid it? First, the first thing that should be checked is the lights. In bad weather conditions, the lights act as a warning. Therefore, it must be ensured that the lights can be used normally. Second, check if the wipers are intact. Driving in rainy weather, the driver’s vision must not be blocked, so the importance of wipers is self-evident. Third, check the tires. Because the wet ground will become slippery, if there is a problem with the tire, it is very prone to rollovers or brakes that cannot be accurately and timely. Fourth, the rearview mirror must open the heater. Because the rearview mirror opens the heater, it removes fog, which avoids blind spots due to rain. Fifth, if there is lightning during the rain, then you must close the windows and seal the entire vehicle. Try not to use electronic products such as mobile phones. Try not to drive under trees and high-voltage lines to prevent lightning strikes.
The metal profile produced by Roll Forming Machine look beautiful, elegant and noble. They are widely used for garden, factory, hotel, exhibition center and villa, etc.
Cold Roll Forming Machine Components:
Roll forming machine consists of Uncoiler, Coil sheet guiding device, Main roll forming system, Post cutting device, Hydraulic station, PLC control system and Support table.
Optional with Hydraulic Decoiler, Auto Stacker, Safe Cover, Pre-Cutting, Film Covering Device, and so on.
Cold Roll Forming Machine Working Flow:
Decoiling→Feeding & Guiding→Flattening(If needed)→Pre- Punching/Cutting(If needed)→Roll Forming→Post Step pressing/Punching(If needed)→Post Cutting→Finished Products To Support Table
Parameter:
1.Suitable to process:Colored Steel plate, galvanized board
2.Width of the plate:1000/1200/1250mm
3.Roller stations:10-19rows
4.Rolling material: Forging Steel 45#
5.Rolling galvanization thickness:0.05 mm
6.Material of the cutting blade :Cr12
7.Hydraulic oil :40#
8.Dimensions: 9000mm*1700mm*1600mm
9.Motor:4+4kw
10.Thickness of the plate:0.3-0.6mm
11.Productivity:8-10m/min
12.Diameter of the roller:70mm
13.Weight:About 4.6 T
14.Voltage:380V 50Hz
15.Processing precision : within 1.00mm
16.Transportation:one complete machine need one 40feet container
to hold
17.Payment term:30%deposit,and balance before delivery
18.Standard components: Chain 1 pcs, Hydraulic oil pipes: 2 pcs,
electromagnetism valves 1 pcs. limit switch:2 pcs
19.This machine is composed of feeding table,forming machine, pressing
device,cutting device, hydraulic system,computer control system,discharge table.
Optional devices have
manual uncoiler,hydraulic uncoiler,auto stacker and so on.
Cold Roll Forming Machine
Cold Roll Forming Machine, Cold Forming Machine, Cold Rolling Machine
Botou Xianfa Roll Forming Machine Factory , https://www.rollforming.nl