Futian Fu Rui sprinkler truck is the smallest sprinkler in the country, with a tank volume of 1-3 cubic meters and can hold 1-3 tons of water. The compact shape of the vehicle is mainly suitable for use in areas with limited road conditions. It is often used in large communities, factories, schools, and other places.
Foton Furui sprinkler - chassis configuration:
Fu Rui 1.55m body, full diesel engine, 5-speed gearbox, 3 tons rear axle, 6.00-13 nylon tire, 120mm beam, warm air, LED lights, with skylights.
Futian Fu Rui sprinkler - modified configuration:
The tank body is generally made of 4mm carbon steel plate. The sprinkling tank body produced by a large manufacturer adopts a one-off coil forming process. The main welding seam of the tank body adopts a direct motion butt welding process. The weld seam is straight and beautiful, and the durability is stronger. With front punching, post-sprinkling, side-spraying and post-platform working platform (greening sprinkler truck guns are installed on the platform, the guns can rotate 360 ​​degrees, and the water mist can be adjusted into a column or a mist with a maximum range of 28 meters).
It can also carry out anti-corrosion treatment on the inside of the tank according to the different transport mediums, and transport raw materials such as drinking water, sewage, and food additives.
Other visitors are also concerned about:
Sprinkler Truck Buying Guide Dongfeng Sprinkler Truck Information Large Sprinkler Truck Information Best Selling Sprinkler List in 2011
This type of SF-706 machine have to keep PCB board,the circular blade is moving.It is suitable for Special height for ultra high component can be 70mm.
This type of SF-701machine through adjust the height of track manually and control At 0.01 mm to solve the problem of V-CUT depth. Accept made to order super high components on the PC board such as power supply.The highest for 400mm is also accepted to customize.
The type of SF-705 v notch PCBA Cutting Machine which is suitable for Thickness of the to-be-cut base plate: 0.5-2.0mm, max. length of 300mm PC plate. Then Processing V-PCD plate, aluminum plate and CUT plate, etc.The using way is Controlled by electric pedal or pneumatic pedal, hoe knife plate splitting is completed by the motion of air cylinder.
The type of SF-716 machine is used for visual PCB depanel.
Visual Platform Desktop Separator,V-cut PCB Cut Depaneling Machine,PCB V-cut Cutting Machine
SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com